UV ofsetový lak lesklý Low Migration 12830

výrobce: FRIMPEKS

Product Information:

UV Curable , Low Migration topcoats specially designed to work on Flexographic applications. The coatings have low migration properties due to their ow migration photointiators and meticulously selected materials when used with low migration inks. Typically these coatings have outstanding flow and leveling properties as well as excellent curing capability features. They create an even, smooth surface with a gloss finish and high scuff resistance, with superior flexibility for scoring and folding.

Typical End Use

Packaging and Labels for applications requiring Low Migration properties.

Typical Properties

Solvent Free, can be further processed immediately.

At a Glance

Flexibility Very Good Solid Content 100%
Suitable for In-Line   Liquid Appearance Light Yellow
Can be Applied via PumpOdorVery Low   Odor Very Low
Suitable for Primary and Secondary Food Packaging      

Technical Data

 Viscosity @22°C Ford Cup Reactivity with 120 W/cm2 Lamp


 Gluable / Imprintable
100668 UV COATINGS FLEXO GLOSS 12830-LM 90 - 100 sec 90mj/cm2 90+ at 60°
100656 UV COATINGS FLEXO GLOSS 12830-LM/HS 90 - 100 sec 90mj/cm2 90+ at 60°
100683 UV COATINGS FLEXO GLOSS 12830-LM/INP 90 - 100 sec 90mj/cm2 90+ at 60°
100634 UV COATINGS FLEXO GLOSS 12830-LM/FS 100 - 110 sec 90mj/cm2 90+ at 60°
100652 UV COATINGS FLEXO GLOSS 12830-LM/FS/HS 100 - 110 sec 70mj/cm2 90+ at 60°
100684 UV COATINGS FLEXO GLOSS 12830-LM/FS/INP 100 - 110 sec 70mj/cm2 90+ at 60°
100744 UV COATINGS FLEXO MATT 12830-LM/FS/MA 410 - 420 sec 70mj/cm2 <25 at 60°
101331 UV COATINGS FLEXO MATT 12830-LM/FS/MA/INP 410 - 420 sec 70mj/cm2 <25 at 60°

Recommended Application

These coatings are designed to be applied through various application systems including flexo and roller coater unit offset water fount on flexo presses.

To get the optimal gloss the recommended application is app 2-3 Gr/m2


Mix well before use, making sure that equipment is clean in order to avoid contamination from other materials

Equipment and Drying

This coating is designed to be cured at with 1-120 Watt/cm2 UV lamps. Greater press speed and curing capability may be achieved with additional UV lamps. Substrate may also have an effect on cure speed. Always test coating for compatibility with ink systems, substrates and for sufficient cure before general use.


Appliance and other equipment must be cleaned with Low Migration approved cleaning products.

Shelf Life and Storage Conditions

UV Products must be stored tightly closed, away from sunlight, avoiding temperatures higher than 50°C. UV Products are packaged leaving sufficient air space to prevent accidental polymerization of the product.



UV Products are generally considered to be non-toxicological. However during handling and use the user should avoid inhalation of vapors as well as direct eye or skin contact. UV products can be an irritant to skin and eyes, wash immediately with soap and water if there is direct contact. Protective eyewear and latex gloves are recommended while using this product. Consult the SDS for additional handling and safety information.


This product is available in: 20 KG pails


Not dangerous goods. Can be transported in freezing temperatures but product should be brought to room temperature prior to use.

Consumer’s care and safety are one of our first target and for this reason food should not be contaminated by any external substance. Within this frame we keep in mind that all the components of our inks must not migrate inside food-packaging. Our low migration ink and coating series have all law requirements to be used in printing for non-food contact surface.

Migration could happen in three different ways:

  • Direct migration
  • Set-off migration due to paper stacking
  • Gaseous migration

Framework Regulation (EC) No 1935/2004 related to materials and articles intended to come into contact with foodstuffs provides the basis for the assurance of a high level of protection of human health and of consumers’ interests in relation to food packaging, whether printed or not. The manufacturer of the final packaging has the responsibility for the compliance of the material and article with the legal requirements laid down in Article 3: Materials and articles must be manufactured in compliance with good manufacturing practice so that, under their normal or foreseeable conditions of use, they do not transfer their constituents to foodstuffs in quantities which could:

  • endanger human health
  • bring about an unacceptable change in the composition of the food
  • bring about a deterioration in the organoleptic characteristics thereof

Declaration of Composition and Product Declaration:

CEPE / EuPIA – Exclusion List

CEPE is the European Council of producers and importers of paints, printing inks and artists colours whereas EuPIA is the European Printing Ink Group of CEPE. The printing industry voluntarily came up with the Exclusion List for specific substances many years ago. The raw materials used by Frimpeks for the formulation of our printing inks/varnishes meet the guidelines of the CEPE / EuPIA Exclusion SWISS ORDINANCE ON MATERIALS AND ARTICLES IN CONTACT WITH FOOD (SR 817.023.21) article 26g, Annex 1 (list 1 and 2) and 6; Nestlé guidance note on packaging inks and varnishes – august 2016..

Heavy Metals

CONEG stands for Coalition of North-Eastern Governors in the USA. One of their legislations, adopted by 18 states as of 1998, requires reductions in the amount of the four heavy metals mercury, lead, cadmium, and hexavalent chromium in packaging and packaging compo- nents sold or distributed in their member states. For Frimpeks printing inks/coatings, the limits for heavy metals as listed in the CONEG-Regulation (USA) are met. The Euro Norm 71.3 refers to the max level of heavy metals in children’s toys. For Frimpeks printing inks/coatings, the limits for heavy metals as listed in the DIN EN 71-3 are met. Heavy metals are no part of our formulations.

Hazardous Substances

Substances mentioned in the directive 2002/95/EC (RoHS) are not intentionally used in our formulations printing inks/coatings.

SVHC-Substances (substances of very high concern):

In our products no substances are used which meet the criteria of SVHC-substances (substances of very high concern). SVHC-substances are substances which are classified as CMR 1 & 2, PBT (PBT pollutants are chemicals that are toxic, persist in the environment and bioaccumulate in food chains), vPvB (Substances that are potentially very persistent and very bioaccumulative) and endocrine disruptors (artificial hormones).

The substances listed in the guide line 67/548/EEC (amended by the directive 2006/121/EC) and in the guide line 76/769/EEC are not part of the formulation of our printing inks/coatings. Furthermore, we confirm that our printing inks/coatings are in accordance with the EC regulation 1895/2005 (repeals the guide line 2002/16/EC).

Enhanced Statement of composition (ESoC) is available on request to support with migration testing and compliance with Plastics Regulation (EU) No 10/2011, the Swiss Ordinance 817.023.21 Annex 1 or 6 or listed on the ‘Provisional List of Additives used in Plastics’ or listed as a food additive in Regulation (EC) No 1333/2008 and Regulation (EC) 1334/2008.

Quality Assurance:

ISO 9001

The production site of Frimpeks is certified according to DIN EN ISO 9001:2015 and DIN EN ISO 14001:2005 (corresponds to EN ISO 14001 edition